Ceramic engine protector
Ceramic engine oil additive
ADD-ENGOIL-CERAMIC ENG PROTECTOR-450ML
Register now and access more than 125,000 products
Prolongs engine lifetime
- Provides long term protection
- Reduces friction and wear significantly
- Improves load carrying capacity of the lube film
- Improves viscosity of the oil
- Provides emergency lubrication
- Reduces engine noise level
- Reduces oil temperature
- Improves cold start performance
These instructions are only recommendations, which are based on our experience. We advise preliminary testing before use.
Datasheets(X)
- Suitable for all gasoline, diesel and LPG engines with or without turbochargers
- Can be mixed with all commercially available engine oils
- Add contents of one bottle to the warm motor oil, preferably shortly after oil change
- Shake well before use
- Recommended use: every 50,000 km
- Dosage: One bottle treats 4 to 6 liters of motor oil. Make sure the oil contents do not exceed the maximum oil level in your engine
Contents | 450 ml |
Smell/fragrance | Characteristic |
Chemical basis | Mineral oil |
Shelf life from production | 36 Month |
Density | 0.89 g/cm³ |
Density conditions | at 20°C |
Min. flashing point | 200 °C |
Last viewed
Hexagon nut, low profile, with clamping piece (non-metal insert) ISO 10511, steel 5, zinc-plated, blue passivated (A2K)
Sealing ring, copper, shape A
1/2 inch ratchet With turntable switching
Softex cleaning cloth
Ratchet for 10 mm bits
One-ear clamp setting tool for cavity anchors For Oetiker and axle boot clamps
Standard cable tie with plastic latch
TX bit
Sealant Dichtfix
1/2 inch cardan joint