Cover/construction film
Cover/construction foil
COVFLM-LDPE-ROLL-TYP200-200SM
Register now and access more than 125,000 products
- For covering large areas of floors, components and equipment that need to be protected from moisture, dust, paint etc. during renovation and painting work
- Suitable for indoor and outdoor use
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Material | LDPE - Low density polyethylene |
Length | 50 m |
Width | 4 m |
Foil type | 200 |
Tolerance of material thickness | 5 % |
Area | 200 m² |
Coating weight per m² | 148 g |
Density | 0.92 g/cm³ |
Design | Translucent |
Min. processing temperature | 15 °C |
Max. processing temperature | 30 °C |
Max. temperature resistance | 60 °C |
Tensile strength | 14 N/mm² |
Resistant to tearing | Yes |
Min. transverse tensile strength | 12 N/mm² |
Elongation at break | 200 % |
Diagonal elongation at break | 250 % |
Min. impact resistance at 1 µm (dart drop) | 1 g |
Ultraviolet resistance | No |
Number of rolls per pallet | 32 PCS |
Foil thickness | 160 µm |
