Digital calliper RW Edition
Digital calliper RW Edition
CAL-DGT-(RW EDITION)-(0-150MM)
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Callipers with calibration certificate and a measuring range of 150 mm
- Digital callipers with Reinhold Würth signature
- Measuring range up to 150 mm
- Two buttons for switching on/off/zero and metric/inch
- Very easy-to-read display, even from wider viewing angles
- Long service life and reliable measurements due to reinforced plastic housing and ground measuring jaw
- Easy transfer of measurement results using the locking screw on the top to lock
- Automatic shutdown after approx. 20 minutes
- Thread table on the rear of the callipers and in the plastic box
- Scope of delivery: 1x digital callipers, 1x CR2032 button cell, 1x plastic box, 1x calibration certificate
Notice
- Keep the callipers clean and dry. Fluid can damage the slide
- Surfaces should be carefully cleaned with cotton fabric
- Never use petrol, acetone or other organic solvents
- Never apply voltage to parts of the digital callipers (e.g. engraving with an electric pin) as this may damage the circuit
Product information
Datasheets(X)
Application area
- The RW Edition digital callipers are ideal for precise measurements in metal processing work, mechanical engineering, quality control and workshops
- With a measuring range of 150 mm and a calibration certificate, it is ideal for professional use
Absolute length measuring accuracy | 0.03 mm |
Digit increment | 0.01 mm |
Max. length measuring range | 150 mm |
Length of jaw | 40 mm |
Last viewed
Aluminium wheel rim cleaner
1/2 inch socket wrench insert metric, hexagon, short
1/4 inch socket wrench insert, metric short
Lubricating grease WGF 130
Multi-purpose grease construction/agriculture
TX bit with hole
Rust Stop Quattro primer
Overlapping cover cap
Universal holder E 6.3 (1/4") With stainless steel sleeve, snap ring and permanent magnet
PH screwdriver With round shank