Leak detection additive Universal
Brilliant leak detection additive
LKDETRADD-A/C-7,5ML-6PCS
Register now and access more than 125,000 products
- Detects leaks quickly and accurately
- Air conditioning service units are not blocked
- Ideal as a preventive measure
- Visible with all UV lamps
- Solvent-free
- Suitable for hybrid and electric vehicles
Additives are always supplied with two adapters R134a and R1234yf.
Datasheets(X)
Würth UV air-conditioning leak detector is a fluorescent UV leak detector for vehicle air-conditioning systems. Compatible with all refrigerants, including hybrid and electric cars. UV leak detector for fast, accurate detection of refrigerant gas leaks.
Dosage: 7.5 ml per 1.5 kg of coolant.
With a 7.5 ml syringe, do the following:
1. Start the vehicle's engine.
2. Activate the air-conditioning unit and set the minimum temperature value.
3. Locate the charge valve on the low pressure side and install the most suitable adapter based on the type of refrigerant gas in the A/C system.
4. Connect the syringe to the adapter and inject the fluid
5. Then disconnect the syringe and adapter from the implant.
6. Check the A/C system with a UV lamp; any leakage will be immediately clear and visible
Contents | 7.5 ml |
Weight of content | 89 g |
Chemical basis | Synthetic oil with a multifunction additive combination |
Density | 0.99 g/cm³ |
Shelf life from production | 60 Month |
Min. flashing point | 0.01 °C |
Water-soluble | No |
Viscosity/consistency | 0 - not applicable |
Boiling point | 0.01 °C |
Last viewed
1/4 inch extension
3/8-inch socket wrench For TX screws, short
Adhesive weight remover
Pass-through ratchet
C 6.3 TX bit (1/4 inch)
TX bit
1/4 inch socket wrench insert, metric short
Chalk line reel with gear ratio
Pressure sprayer Solvent-resistant
1/2 inch socket wrench insert metric, hexagon, short