PURlogic® Premiumpress 1-C foam gun
1C foam gun PURLOGIC PREMIUMpress
FMGUN-1C-(PURLOGIC-PREMIUMPRESS)
Register now and access more than 125,000 products
- Stop – No uncontrolled escaping of foam
- Ergonomic grip with rubber trim for safe and comfortable holding
- Foam dispensing quantity can be adjusted variably for a clean spraying pattern
- Conical nozzle, ideally suited for extension tips for slim joints
Datasheets(X)
The gun is used to apply 1-component polyurethane foam. All commercially available gun foams in aerosol spray cans with standard screw-on adapter are suitable. Being able to precisely adjust the PU foam quantity means that the gun is suitable for controlled dispensing and customised filling of joints, thereby enabling precise and secure installation.
Position the required flow of material with dispensing screw at the back of the gun: Turning in a clockwise direction reduces the foam output; turning in anti-clockwise direction increases the foam output. Check which setting gives you optimum results.
Material | Fibre glass |
Colour | Red, Black |
Product weight (per item) | 524.000 g |
Length | 350 mm |
Last viewed
TX bit
Glazing packer
Tyre inflator with analogue calibration with 2C handle
Ratchet combination wrench set, metric, straight 5 pieces in plastic case
Pneumatic spindle
Triple square bit
3/8" adapter With 3/8-inch square socket and 10 mm hexagon socket
1/4 inch cardan joint
1/2 inch socket wrench insert metric, hexagon, short
Hose clamp set, strap width: 12 mm 111 pieces