Superglue Klebfix Easy Pen - SUPGLU-KLEBFIX-(EASY-PEN)-30G

Superglue Klebfix Easy Pen - SUPGLU-KLEBFIX-(EASY-PEN)-30G - 1

Superglue Klebfix Easy Pen

Name: Superglue Klebfix Easy Pen
Brand: Würth
SKU: 0893090030

Klebfix Easy Pen cyanoacrylate structural adhesive
SUPGLU-KLEBFIX-(EASY-PEN)-30G

Art.-no. 0893090030

EAN 4061975252678

All versions

Prices for customers after login

Superglue Klebfix Easy Pen

Art.-no. 0893090030

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +82 1588 6322

For easy and effortless work. Very easy to use one-handed

Easy Pen design

Fits ergonomically in the hand

Stable and secure

Lever for easy and effortless work without too much pressure

Clever special closure

One-handed operation

Precise dispensing

Prevents you from gluing the tip

Bonds in seconds

Can immediately be processed further

Quick repairs

Simple designs are possible without additional fixing

Solvent and silicone-free

Proof of Performance

NSF registered, class P1, reg. no. 151994

NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water

Notice

It is advisable to wear protective gloves and safety goggles.

If surfaces are too dry or acidic, this will delay or prevent hardening, while higher levels of moisture and alkaline surfaces will have an accelerating effect.

thanks to the vapour pressure of the liquid adhesive, slowly hardening excess around the point of adhesive can lead to a white deposit (blooming effect). These are adhesive vapours that are hardening. These can be removed with isopropyl alcohol or acetone for example. However, it is important to ensure that the surfaces of the parts to be cleaned are also resistant to these solvents. Blooming can be prevented / reduced by using the adhesive economically and ensuring sufficient air humidity and ventilation in the work area.

Application area

NSF registered, class P1, reg. no. 151994

NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Superglue for bonding metal, plastic and rubber parts with and to each other.

Instructions

The substrates must be clean, dry, and grease-free. For pre-treatment, refer to the technical data sheet. Apply a thin, even layer of adhesive to just one of the surfaces to be bonded. Apply sufficient pressure to make the connection immediately, in order to ensure complete contact.

Chemical basis	Cyanoacrylate acidic ester
Colour	Transparent
Density	1.06 g/cm³
Min./max. hardening time /conditions	2-90 s / Depending on the material
Min./max. tensile strength /conditions	0.01-0.01 N/mm² / in accordance with DIN EN 1465, aluminium/aluminium, 0.2 mm gap, 20°C
Min./max. tensile strength	0.01-0.01 N/mm²
Stretch capacity	2 %
Max. gluing gap size	0.1 mm
Min./max. temperature resistance	-30 to +80 °C
Min./max. processing temperature	5 to 35 °C
Silicone-free	Yes
Solvent-free	Yes
Shelf life from production/conditions	15 Month / dry, at room temperature
Contents	30 ml
Weight of content	30 g